 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Features Integrated LNA, Mixer and LO Buffer Amplifier 2.5 dB Noise Figure 12.0 dB Conversion Gain 4x4mm QFN Package 100% RF, DC and NF Testing General Description Mimix Broadband's 10.0-16.0 GHz QFN packaged receiver has a noise figure of 2.5 dB and 12.0 dB conversion gain. The device integrates an LNA, image reject mixer and LO buffer amplifier within a fully molded 4x4mm QFN package. The image reject mixer eliminates the need for a bandpass filter after the LNA to remove thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. This device uses Mimix Broadband's GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. This device is well suited for Point-to-Point Radio, LMDS, SATCOM and VSAT applications. Absolute Maximum Ratings1 Supply Voltage (Vd1,2,3) Supply Current (Id1,2,3) Gate Bias Voltage (Vg1,2,3) Gate Bias Voltage (Vg4) Input Power (RF) LO Power (LO) Storage Temperature (Tstg) Operating Temperature (Ta) Channel Temperature (Tch) ESD Min. Machine Model (MM) ESD Min. Human Body Model (HBM) Moisture Sensitivity Level +4.3V 200 mA -1.7V min., 0V max. -4 V +10 dBm +12 dBm -65 to +150 C -55 to +85 C -40 to MTTF Graph2 Class A Class 1A MSL3 (1) Operation of this device above any one of these parameters may cause permanent damage. (2) Channel temperature directly affects a device's MTTF. Channel temperature should be kept as low as possible to maximize lifetime. Electrical Characteristics (Ambient Temperature T = 25 oC) Parameter Frequency Range (RF) Frequency Range (LO) Frequency Range (IF) Conversion Gain (CG) Noise Figure (NF) Input Third Order Intercept (IIP3) Image Rejection LO Input Drive LO/RF Isolation RF Input Return Loss LO Input Return Loss IF Return Loss Drain Bias Voltage (Vd1,2,3) Gate Bias Voltage (Vg1,2,3)* Gate Bias Voltage (Vg4)** Supply Current (Id1) Supply Current (Id2) Supply Current (Id3) Supply Current (Ig4) *Vg1,2 and 3 are adjusted to achieve constant drain current regulation. Units GHz GHz GHz dB dB dBm dBc dBm dB dB dB dB VDC VDC VDC mA mA mA mA Min. 10.0 7.0 DC 10.0 -7 15.0 0.0 3.7 -1.5 -3.8 Typ. 12.0 2.5 2 20.0 5.0 -50.0 10.0 10.0 10.0 4.0 -0.3 -3.0 30 60 80 1.5 Max. 16.0 19.0 3.5 17.0 3.3 10.0 4.0 -0.1 -2.0 **Vg4 provides mixer bias and is fixed at -3.0V. Page 1 of 9 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Receiver Measurements XR1015-QH: LSB Conv. Gain vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 22 20 18 16 14 12 10 8 6 4 2 0 8 10 12 14 16 18 +25C -40C +85C XR1015-QH: USB Conv. Gain vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 22 20 18 16 14 12 10 8 6 4 2 0 8 10 12 14 16 18 +25C -40C +85C Frequency (GHz) USB Conv. Gain (dB) LSB Conv. Gain (dB) Frequency (GHz) XR1015-QH: LSB Noise figure vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 8 7 6 +25C -40C +85C XR1015-QH: USB Noise figure vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 8 7 6 +25C -40C +85C LSB NF (dB) USB NF (dB) 5 4 3 2 1 0 8 10 12 14 16 18 Frequency (GHz) 5 4 3 2 1 0 8 10 12 14 16 18 Frequency (GHz) XR1015-QH: LSB IIP3 vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm Pin/tone=-20dBm 14 12 10 8 LSB IIP3 (dBm) +25C -40C +85C XR1015-QH: USB IIP3 vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm Pin/tone=-20dBm 14 12 10 8 USB IIP3 (dBm) +25C -40C +85C 6 4 2 0 -2 -4 -6 -8 -10 8 10 12 14 16 18 Frequency (GHz) 6 4 2 0 -2 -4 -6 -8 -10 8 10 12 14 16 18 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Receiver Measurements (cont.) XR1015-QH: LSB Image Rejection vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 0 -5 0 -5 XR1015-QH: USB Image Rejection vs Freq , Over Temp Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm -15 -20 -25 -30 -35 8 10 12 14 16 18 USB Image Rej. (dB) LSB Image Rej. (dB) -10 +25C -40C +85C -10 -15 -20 -25 -30 -35 8 10 12 14 +25C -40C +85C 16 18 Frequency (GHz) Frequency (GHz) XR1015-QH: LSB Conv. Gain vs IF Freq , 25degC Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,LO=5dBm 20 18 16 LSB Conv. Gain (dB) 1GHz 2GHz 3GHz XR1015-QH: USB Conv. Gain vs IF Freq , 25degC Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,LO=5dBm 20 18 16 USB Conv. Gain (dB) 1GHz 2GHz 3GHz 14 12 10 8 6 4 2 0 8 10 12 14 16 18 Frequency (GHz) 14 12 10 8 6 4 2 0 8 10 12 14 16 18 Frequency (GHz) XR1015-QH: USB Conv. Gain vs LO Power , 25degC Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz 20 18 LO & RF Return Loss (dB) XR1015-QH: LO & RF Return Loss (dB) vs. RF (GHz). VD1,2,3 = 4 V, ID1+ID2 = 80 mA , ID3 = 70 mA, VG4 = - 3 V 0 -2.5 16 USB Conv. Gain (dB) 14 12 10 8 6 4 2 0 8 10 12 14 LO=0dBm LO=5dBm LO=10dBm -5 -7.5 -10 -12.5 -15 -17.5 -20 -22.5 -25 5 10 15 20 RF (GHz) RF RL LO RL 16 18 25 30 35 40 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Receiver Measurements (cont.) XR1015-QH: USB Noise Figure vs Freq, Varying Vd1,2,3 Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 22 20 18 USB Noise Figure (dB) XR1015-QH: Port Leakage vs Freq Vd1,2,3=4V,Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz LO=+5dBm,Pin=-20dBm 0 -10 Leakage (dBm) RF-IF LO-IF LO-RF 16 14 12 10 8 6 4 2 0 8 10 12 14 Vd1,2,3=3V Vd1,2,3=4V Vd1,2,3=5V -20 -30 -40 -50 -60 16 18 8 10 12 14 16 18 Frequency (GHz) Frequency (GHz) XR1015-QH: USB Conv. Gain vs Freq, Varying Vd1,2,3 Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm 22 20 18 USB Conv. Gain (dB) Vd1,2,3=3V Vd1,2,3=4V Vd1,2,3=5V XR1015-QH: USB Conv. Gain vs Freq, Varying Id1,2,3 Vd1,2,3=4V,Vg4=-3V,IF=2GHz,LO=+5dBm 22 20 18 USB Conv. Gain (dB) Id=40/80/110mA Id=30/60/80mA Id=20/40/55mA 16 14 12 10 8 6 4 2 0 8 10 12 14 16 14 12 10 8 6 4 2 0 16 18 8 10 12 14 16 18 Frequency (GHz) Frequency (GHz) XR1015-QH: USB IIP3 vs Freq, Varying Vd1,2,3 Id1,2,3=30,60,80mA,Vg4=-3V,IF=2GHz,LO=+5dBm Pin=-20dBm/tone 14 12 10 8 6 4 2 0 -2 -4 -6 -8 -10 8 10 12 14 14 12 10 USB IIP3 (dBm) XR1015-QH: USB IIP3 vs Freq, Varying Id1,2,3 Vd1,2,3=4V,Vg4=-3V,IF=2GHz,LO=+5dBm,Pin=-20dBm/tone USB IIP3 (dBm) 8 6 4 2 0 -2 -4 -6 -8 -10 Id=40/80/110mA Id=30/60/80mA Id=20/40/55mA Vd1,2,3=3V Vd1,2,3=4V Vd1,2,3=5V 16 18 8 10 12 14 16 18 Frequency (GHz) Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Receiver Measurements (cont.) XR1015-QH: LO/RF Isolation (dB) vs. RF (GHz). VD1,2,3 = 4 V, ID1+ID2 = 80 mA , ID3 = 70 mA, VG4 = - 3 V (1.5 mA) 0 -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 5 10 15 20 25 30 35 40 RF (GHz) LO/RF Isolation (dB) LO-RF MTTF XR1015-QH: MTTF (hours) vs. Backplate Temp (C) 1.00E+13 1.00E+12 1.00E+11 MTTF (hours) 1.00E+10 MTTF (hours) 1.00E+09 1.00E+08 1.00E+07 1.00E+06 0 20 40 60 80 100 120 140 Backplate Temp (C) MTTF is calculated from accelerated life-time data of single devices and assumes an isothermal back-plate. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Package Dimensions / Layout Functional Block Diagram NC 24 GND 23 LO 22 GND 21 NC 20 VG3 19 Pin Designations Pin Number Pin Name Pin Function 2 IF1 IF1 Output Nominal Value To Hybrid 90 (LSB) To Hybrid 0 (USB) (1.8 ) To Hybrid 0 (LSB) To Hybrid 90 (USB) (1.8 ) (>2M ) -0.3V (1M ) 4.0V, 30 mA (27.5 ) -0.3V (1M ) 4.0V, 60 mA (14 ) -3.0V, 1.5 mA (1980 ) 4.0V, 80 mA (14.4 ) -0.3V (1M ) (>2M ) GND IF1 NC NC IF2 GND 1 BUF 2 3 4 5 18 17 VD3 VG4 NC VD2 VG2 VD1 I Q IRM 16 15 14 LNA 6 13 5 9 12 13 14 15 17 18 19 22 3,4,7,11,16, 20,24 1,6,8,10,21, 23 IF2 RF VG1 VD1 VG2 VD2 VG4 VD3 VG3 LO N/C* GND IF2 Output RF Input Gate 1 Bias Drain 1 Bias Gate 2 Bias Drain 2 Bias Gate 4 Bias Drain 3 Bias Gate 3 Bias LO Input Not Connected Ground 10 11 7 NC 8 GND 9 RF GND NC VG1 12 *It is recommended to externally ground all N/C pins. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1,2,3 at 4.0V with 30, 60, 80mA respectively. Additionally, a fixed voltage bias of -3V is required for mixer bias. It is recommended to use active bias to keep the currents constant in order to maintain the best performance over temperature. Depending on the supply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current. The gate of the pHEMT is controlled to maintain correct drain current and thus drain voltage. The typical gate voltage needed to do this is -0.3V. Make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply. App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as possible, with additional 10F decoupling caps. Recommended Board Layout 100pF 0402, 10F 0805 Recommend to externally ground all N/C pins Recommended Decoupling Capacitors: Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH MxN Spurious Tables mRF 0 1 2 3 4 nLO 0 -26 -62 -64 -71 1 -32 0 -50 -65 -56 2 -42 -28 -13 -56 -49 3 -48 -56 -13 -28 -43 4 -55 -66 -50 0 -33 RF=10 GHz @ -10 dBm LO=8 GHz @ +5 dBm Data measured without 90deg hybrid All values in dBc below IF power level mRF 0 1 2 3 4 nLO 0 -27 -59 -67 -77 1 -40 0 -45 -65 -64 2 -35 -58 -17 -35 -55 3 -55 -62 -55 -35 -17 4 -57 -71 -64 -65 -45 RF=10 GHz @ -10 dBm LO=12 GHz @ +5 dBm Data measured without 90deg hybrid All values in dBc below IF power level nLO 0 -28 -81 - mRF 0 1 2 3 4 1 -31 0 -63 -78 - 2 -28 -63 -20 -71 - 3 -56 -62 -65 -48 -78 4 -80 -78 -69 -69 RF=16 GHz @ -10 dBm LO=14 GHz @ +5 dBm Data measured without 90deg hybrid All values in dBc below IF power level nLO 0 -26 -64 - mRF 0 1 2 3 4 1 -18 0 -62 -74 - 2 -42 -53 -17 -62 -76 3 -58 -66 -43 -68 4 -77 -68 -67 RF=16 GHz @ -10 dBm LO=18 GHz @ +5 dBm Data measured without 90deg hybrid All values in dBc below IF power level Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 8 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 10.0-16.0 GHz GaAs Receiver QFN, 4x4mm August 2009 - Rev 28-Aug-09 R1015-QH Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: * Do not ingest. * Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. * Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Electrostatic Sensitive Device Observe all necessary precautions when handling. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 C of Peak Ramp Down Rate SnPb 3-4 C/sec 60-120 sec @ 140-160 C 60-150 sec 240 C 10-20 sec 4-6 C/sec Pb Free 3-4 C/sec 60-180 sec @ 170-200 C 60-150 sec 265 C 10-20 sec 4-6 C/sec Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. Part Number for Ordering XR1015-QH-0G00 XR1015-QH-0G0T XR1015-QH-EV1 Description Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel XR1015-QH evaluation board Caution: ESD Sensitive Appropriate precautions in handling, packaging and testing devices must be observed. Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 9 of 9 Characteristic Data and Specifications are subject to change without notice. (c)2009 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. |
Price & Availability of XR1015-QH-0G00
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |